Psychiatry Help Desk

Tononi Lab Shares

In order to connect to the Tononi Lab shares (folders), you must be on the WisPIC internal network.  You are on this network if any of the following conditions are true:

  • You are on a computer at WisPIC that has a physical Ethernet cable connected to it.
  • You are on a WiFi-connected laptop that is connected to SMPH’s VPN Portal.
  • You are on a computer outside of WisPIC that is connected to SMPH’s VPN Portal.

If any of these conditions is true, follow the steps below based on your computer operating system below.

  1. Click the manila folder labeled File Explorer in the task bar:
  2. In left column, right-click This PC to select Map Network Drive…, shown next:
  3. A smaller window will appear where you select any available drive letter from the drop-down “Drive” menu, e.g., Z:.
  4. Enter \\tononi-nas.psychiatry.wisc.edu\, followed by share name (folder), such as nccam_scratch. Next, click Finish, as shown below:
    (The IP address 144.92.3.214 will also work)
  5. For the final step, type ad\yourNetID (note the direction of the slash, which is a backslash), e.g., ad\bbadger. Finally, click OK:

 

If you need further assistance, or this process didn’t work, please contact the help desk.

  1. While in Finder, either press command-K on the keyboard or click Go in the menu bar to select Connect to Server…:
  2. In the window that appears, enter smb://tononi-nas.ad.wisc.edu. Then click Connect:
    (The IP address 144.92.3.214 will also work)
  3. In the next window, select the share you need, which will already be authorized by your supervisor or lab manager.
  4. If prompted, your NetID and password, then click Connect.

If you need further assistance, or this process didn’t work, please contact the help desk